Rondon video chat ruletcom - Cam free password web xxx

The accompanied Cam Play software is then needed to play back the recorded video files. Although the sensitivity of the sensor is already very good compared to other products CMOS sensor, there is still a limitation.

If the video is still too dark for your environment, please try to increase the lightness of the light source or you can adjust the "low light sensitivity" in the "video settings" page.

After about one minute, you can run the Cam View software to access the IP camera, the CAM ID should be displayed on the "auto-search" list.

Cam free password web xxx-3

But need to keep in mind that after the "low light sensitivit" is increased, the picture exposure time is increased, there could be some video tail in the video.

The models IC212/w and IC602 with IR led inside could help on some of the very tough environment.

For example, if you have upload bandwidth at 986Kpbs and you have 4 IP cameras. The file name of the firmware you should download looks like this, IC202-gen-020210-n.f Once you have the new firmware, go to upgrade page and click “Browse” button to locate the firmware in your computer and then click “Upgrade” button to do the upgrade.

We suggest setting your IP camera Internet speed at 256Kpbs. Please set IP camera Internet Speed at 256Kpbs or 128Kbps. Make sure the network camera is connected to Internet and located in the same LAN with the computer where Cam View is running on. Open Cam View software and the IP Cam (Cam ID) appears under Auto Search list and right click on the Cam ID and click “Web Configure” to get into the web page of the IP Cam. That’s all and you just wait a few minutes for the upgrade.

Users only need to access the address rtsp://ip_cam_address/ID.password on the 3G mobile phone to access the video of the IP camera.

Last modified 06-Jun-2017 11:44